DPA 2017 Shotgun Microphone
To see item prices, please log in
2017 Supercardioid Shotgun Microphone
Specifications
Directional pattern Supercardioid at 1 kHz
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz - 20 kHz
Effective frequency range, ±2 dB, at 60 cm (23.6 in) 70 Hz to 18 kHz with typ. 2 dB soft boost at 15 kHz
Sensitivity, nominal, ±2 dB at 1 kHz 25 mV/Pa (± 2 dB )
Equivalent noise level, A-weighted Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
Distortion, THD < 1% 140 dB SPL (143 dB SPL peak)
Dynamic range Typ. 130 dB
Max. SPL, THD 10% 145 dB SPL (148 dB SPL peak)
Rated output impedance 60 Ω
Minimum load impedance 2 kΩ
Cable drive capability 100 m (328 ft)
Output balance principle Impedance balancing with Active Drive
Common mode rejection ratio (CMRR) > 60 dB
Power supply (for full performance) P48 (Phantom Power)
Current consumption 1.8 mA
Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color Black
Weight 115 g
Microphone diameter 19 mm (0.75 in)
Capsule diameter 17 mm (0.67 in)
Microphone length 184 mm (7.2 in)
Maximum output voltage, RMS 8.7 V (21 dBu)
Polarity +V at pin 2 for positive sound pressure
Temperature range -40°C to 45°C
Relative humidity (RH) Up to 90 %
Typical on-axis response of a 2017 measured at 60 cm (23.6 in)
Typical directional characteristics of a 2017
