DPA 2028-B-B01
To see item prices, please log in
2028 Supercardioid Vocal Mic, Wired DPA Handle, Black
- Durable mechanical construction
- Reduces feedback issues
- Uniform supercardioid directionality
- Extreme SPL (Sound Pressure Level) handling
- Easy to EQ
Specifications
Directional pattern Supercardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz - 20 kHz
Effective frequency range ±2 dB, at 12 cm (4.7 in) 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz 5 mV/Pa; -46 dB re. 1 V/Pa, 5 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
Equivalent noise level, A-weighted Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
Distortion, THD < 1% 136 dB SPL RMS, 139 dB SPL peak
Dynamic range Typ. 117 dB
Max. SPL, THD 10% 160 dB SPL peak
Rated output impedance 150 Ω
Minimum load impedance 1 kΩ
Cable drive capability 100 m (328 ft)
Output balance principle Impedance balancing with Active Drive
Common mode rejection ratio (CMRR) > 50 dB at 1 kHz
Power supply (for full performance) P48 (Phantom Power)
Current consumption Max 2.5 mA
Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color Matte black
Weight 286 g (10.1 oz)
Microphone diameter 48 mm (1.9 in)
Capsule diameter 19 mm (0.75 in)
Microphone length 188 mm (7.4 in)
Maximum output voltage, RMS 9 Vrms; 19 dBV; 28 dBu
Polarity +V at pin 2 for positive sound pressure
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90 %
Typical on-axis response of a DPA 2028 Vocal Mic measured at 12 cm (4.7 in)
Typical directional characteristics of a DPA 2028 Vocal Mic
