DPA 4098-DC-G-B01-045

DPA

To see item prices, please log in

4098 CORE Supercardioid Mic, Black, XLR, 47 cm (18 in) Boom, top and bottom Gooseneck

Speech intelligibility - low noise

Outstanding audio quality
Wireless podium mic capability
Highly directional – very isolated
High rejection of radio frequency interference
Sleek Scandinavian design

DPA gooseneck microphones have quickly become a very popular choice for podium mics as well as for conference room usage as either tabletop or ceiling mount.

Specifications

Directional pattern Supercardioid

Principle of operation Pressure gradient

Cartridge type Pre-polarized condenser

Frequency response 20 Hz - 20 kHz

Effective frequency range ±2 dB, at 20 cm (7.9 in) MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz, XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz

Sensitivity, nominal, ±3 dB at 1 kHz 16 mV/Pa; -36 dB re. 1 V/Pa

Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))

Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)

Distortion, THD < 1% - Legacy 122 dB SPL RMS, 125 dB SPL peak

Distortion, THD < 1% - CORE 130 dB SPL RMS, 133 dB SPL peak

Dynamic range - Legacy Typ. 102 dB

Dynamic range - CORE Typ. 110 dB

Max. SPL, THD 10% 135 dB SPL peak

Rated output impedance From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001-BC XLR Adapter: 100 Ω

Minimum load impedance 2 kΩ

Cable drive capability MicroDot: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
XLR-3M: Up to 100 m (328 ft)

Output balance principle Signal balanced with XLR connector or DAD6001-BC XLR Adapter

Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter

Power supply (for full performance) MicroDot: Min. 5 V to max. 10 V through DPA adapter for wireless systems or
P48 (Phantom Power) with DAD6001-BC XLR adapter XLR-3M: P48 (Phantom Power)

Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter

Connector MicroDot or XLR-3M

Color Black

Weight

Microdot:
16 cm (6 in): 12 g (0.4 oz)
28 cm (11 in): 20 g (0.7 oz)
43 cm (17 in): 28 g (1.0 oz)
77 cm (30 in): 55 g (1.9 oz)
122 cm (48 in): 67 g (2.4 oz)

XLR-3M:
20 cm (8 in): 75 g (2.6 oz)
32 cm (13 in): 80 g (2.8 oz)
47 cm

Microphone diameter 5.7 mm (0.22 in)

Microphone length

Microdot: 16 cm (6 in), 28 cm (11 in), 43 cm (17 in), 77 cm (30 in), 122 cm (48 in)
XLR-3M: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in).

Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)

Temperature range -40°C to 45°C (-40°F to 113°F)

Relative humidity (RH) Up to 90%

Typical on and off-axis response of DPA 4098

Typical directional characteristics of DPA 4098

Adapters & connectors

DPA's adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to only one wireless system.

>> Microphone adapters

In addition, DPA has # fixed connections available, like LEMO 3 pin, TA4F mini-XLR and Mini-Jack.
Please visit our product configurator to learn more:

>> 4098 Miniature Supercardioid Gooseneck Mic configurator (Floor stand solution)
>> 4098 Miniature Supercardioid Gooseneck Mic configurator (Tabletop & Ceiling solution)