Mono-Sets CMC 1 K

Schoeps

To see item prices, please log in

Quantity

Only 0 left!

Features

Complete alternative to the renowned CMC 6
Fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes
Version of the CMC 1 with permanently attached cable
Shortest version of the CMC 1
Available with different cable lengths and plugs, also for use with pocket transmitter with P12/48. Standard: 5 m (16.5 ft) cable with XLR3M

Order number

No. 132013: 5 m Kabel, XLR3M
No. 132016: 0,5 m Kabel, Lemo-3pin Sound Devices
No. 132017: 0,5 m Kabel, Lemo-3pin Zaxcom

Description

The CMC 1 K is identical to the CMC 1 U, but instead of a built-in XLR connector, it has an attached cable.

The CMC 1 is our new, small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

At SCHOEPS, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6. Through modern electronic design, these outstanding electrical properties have been achieved:

high maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
very low current consumption: 2.0 mA at 48 Volts
operates on 48 V or 12 V phantom power, reliable operation even if powering is somewhat marginal
very high immunity from RF interference with the SCHOEPS RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
flat frequency response
very low distortion
constant output impedance across the audio frequency range
balanced, direct-coupled, class-A output circuit
output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

A complete Colette-series microphone consists of an MK capsule and a CMC amplifer. All capsules and active accessories of the Colette system are compatible with the CMC 1.

The CMC 1 works with standard 12-Volt or 48-Volt phantom powering. Power consumption is lower at 12 Volts--an advantage for battery-powered operation.

Variants

The CMC 1 K is available in the following variants:

#132013: Standard: 5 m (16.5 ft) cable with XLR-3M connector.
#132016: Option: 0.5 m (1.65 ft) cable with Lemo-3pin for Sound Devices A 10
#132017: Option: 0.5 m (1.65 ft) cable with Lemo-3pin for Zaxcom ZMT (Phantom)
Special versions with any cable length

Mono-Sets

138615LemoSD Mono-Set CMC 1 K (LemoSD) MK 4
Set with one microphone and accessories . Set including Premium case for CCM, SGC, MK 4, CMC 1 K (0,5m cable, Lemo-3pin Sound Devices), B 5 D

138617LemoSD Mono-Set CMC 1 K (LemoSD) MK 41
Set with one microphone and accessories . Set including SGC, Premium case for CCM, B 5 D, MK 41, CMC 1 K (0,5m cable, Lemo-3pin Sound Devices)

138701LemoSD Mono-Set CMC 1 K (LemoSD) MK 41V
Set with one microphone and accessories . Set including SGC, B 5 D, MK 41V, CMC 1 K (0,5m cable, Lemo-3pin Sound Devices), Premium case for CCM, 2 * O-Ring for MK 8/V

138703LemoSD Mono-Set CMC 1 K (LemoSD) MK 4V
Set with one microphone and accessories . Set including SGC, MK 4V, 2 * O-Ring for MK 8/V, Premium case for CCM, CMC 1 K (0,5m cable, Lemo-3pin Sound Devices), B 5 D

138619LemoSD Mono-Set CMC 1 K (LemoSD) MK 5
Set with one microphone and accessories . Set including Premium case for CCM, SGC, CMC 1 K (0,5m cable, Lemo-3pin Sound Devices), MK 5, B 5 D

138705LemoSD Mono-Set CMC 1 K (LemoSD) MK 8
Set with one microphone and accessories . Set including MK 8, SGC, B 5 D, Premium case for CCM, CMC 1 K (0,5m cable, Lemo-3pin Sound Devices), 2 * O-Ring for MK 8/V

138615LemoZax Mono-Set CMC 1 K (LemoZax) MK 4
Set with one microphone and accessories . Set including SGC, Premium case for CCM, B 5 D, CMC 1 K (0,5m cable, Lemo-3pin Zaxcom), MK 4

138617LemoZax Mono-Set CMC 1 K (LemoZax) MK 41
Set with one microphone and accessories . Set including Premium case for CCM, SGC, CMC 1 K (0,5m cable, Lemo-3pin Zaxcom), MK 41, B 5 D

138701LemoZax Mono-Set CMC 1 K (LemoZax) MK 41V
Set with one microphone and accessories . Set including SGC, MK 41V, 2 * O-Ring for MK 8/V, Premium case for CCM, CMC 1 K (0,5m cable, Lemo-3pin Zaxcom), B 5 D

138703LemoZax Mono-Set CMC 1 K (LemoZax) MK 4V
Set with one microphone and accessories . Set including MK 4V, SGC, B 5 D, CMC 1 K (0,5m cable, Lemo-3pin Zaxcom), Premium case for CCM, 2 * O-Ring for MK 8/V

138619LemoZax Mono-Set CMC 1 K (LemoZax) MK 5
Set with one microphone and accessories . Set including SGC, Premium case for CCM, B 5 D, MK 5, CMC 1 K (0,5m cable, Lemo-3pin Zaxcom)

138705LemoZax Mono-Set CMC 1 K (LemoZax) MK 8
Set with one microphone and accessories . Set including SGC, MK 8, 2 * O-Ring for MK 8/V, CMC 1 K (0,5m cable, Lemo-3pin Zaxcom), Premium case for CCM, B 5 D

138615XLR Mono-Set CMC 1 K (XLR) MK 4
Set with one microphone and accessories . Set including CMC 1 K (5m cable, XLR3M), Premium case for CCM, SGC, MK 4, B 5 D

138617XLR Mono-Set CMC 1 K (XLR) MK 41
Set with one microphone and accessories . Set including CMC 1 K (5m cable, XLR3M), SGC, Premium case for CCM, B 5 D, MK 41

138701XLR Mono-Set CMC 1 K (XLR) MK 41V
Set with one microphone and accessories . Set including CMC 1 K (5m cable, XLR3M), MK 41V, SGC, B 5 D, Premium case for CCM, 2 * O-Ring for MK 8/V

138703XLR Mono-Set CMC 1 K (XLR) MK 4V
Set with one microphone and accessories . Set including CMC 1 K (5m cable, XLR3M), SGC, MK 4V, Premium case for CCM, 2 * O-Ring for MK 8/V, B 5 D

138619XLR Mono-Set CMC 1 K (XLR) MK 5
Set with one microphone and accessories . Set including CMC 1 K (5m cable, XLR3M), Premium case for CCM, SGC, MK 5, B 5 D

138705XLR Mono-Set CMC 1 K (XLR) MK 8
Set with one microphone and accessories . Set including CMC 1 K (5m cable, XLR3M), MK 8, SGC, B 5 D, Premium case for CCM, 2 * O-Ring for MK 8/V